Original
By certification 
Overview
Glai Rapid-rate Thermal Cycle Chamber is ideally suited for specimen test requiring quick changes of temperature. It can evaluate the failure of thermal mechanical properties of product. Normally, the temperature rate is less than 20℃/min, which can achieve the real application environment of testing sample by the fast ramp rate.
Application
1. To simulate test environment with different temperature and humidity.
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, and drying test.
Design features of the chamber
1. It has cable ports are provided on the left side to allow easy wiring of specimens for measurement or voltage application.
2. The door equipped with hinges preventing auto-closing.
3. It can designed to comply with major environmental test standards like IEC, JEDEC, SAE and etc.
4. This chamber is safety tested with CE certificate.
Programmable controller
1. It adopts high-precision programmable touch screen controller for easy and stable operation.
2. Step types includes ramp, soak, jump, auto-start, and end.
Sizes of Rapid Ramp Change Thermal Chambers | ||||||
Model |
Volume (L) |
Temperature Range |
Change Rate |
Rated Power |
Internal Dimension (mm) W*H*D |
External Dimension (mm) W*H*D |
RC/T280 |
280 |
-70～150°C |
5°C/min |
13.5KW |
700*800*500 |
900*2100*200 |
10°C/min |
30KW |
900*2100*2400 |
||||
15°C/min |
46.5KW |
900*2100*2400 |
||||
RC/T500 |
500 |
-70～150°C |
5°C/min |
16.5KW |
700*800*900 |
900*2100*2200 |
10°C/min |
33KW |
900*2100*2400 |
||||
15°C/min |
52.5KW |
900*2100*2400 |
||||
RC/T1000 |
1000 |
-70～150°C |
5°C/min |
33KW |
1000*1000*1000 |
1200*2300*2450 |
10°C/min |
52.5KW |
1200*2300*2450 |
||||
15°C/min |
81KW |
1200*2300*2700 |
||||
Basic Specification | ||||||
Performance |
Temperature Range |
A: -20～150°C, B: -40～150°C, C: -70～150°C, D: or customized |
||||
Temperature Fluctuation |
±0.5°C |
|||||
Temperature Uniformity |
±2.0°C |
|||||
Ramp Rate |
﹣55°C~85°C ≤15°C/min for heating (non-linear, based on on-load) |
|||||
Material |
External Casing |
Cold-rolled A3 (Q235) steel plates with plastics painted. |
||||
Interior Working Room |
Stainless Steel Plates SUS304 with miror surface |
|||||
Heat Isolation |
Polyurethane foams and fine glass fibres |
|||||
Illumination Lamp |
One illumination lamp in per standard test chamber. |
|||||
Casters |
4pcs, with PU covered for protection. Height adjustable and direction universal. |
|||||
Viewing Window |
Multi-layer hollow toughened glass with conductive films for heating to defrost |
|||||
Door |
Manually operated sliding door with unlock button |
|||||
Heating & Cooling System |
Heater |
Steipped Nickel-chromium Wire Heater |
||||
Air Blower |
Anti-temperature stainless fan blades with low noise |
|||||
Compressor |
Hermetically-sealed Techmesh® or semi-sealed Bitzer® or GEA® or equivalent compressors |
|||||
Cooling Method |
Single or dual cooling (Air-cooled or Water-cooled) |
|||||
Refrigerant |
R404A or/and R23 (eco-friendly) |
|||||
Condenser |
Plate-type heat exchanger |
|||||
Control System |
Controller |
7" Programmable colorful touch-screen display |
||||
Functions |
Data Record (Max 1500 days x 24hrs/per min), History Curve, USB data download & upload, Remote controlling through PC, Automatic protection alarms, etc. |
|||||
Program |
1~100 programs, 1~100 steps for per program, Max 99hrs 59mins for per program. 99 programs can be interlinked. |
|||||
Temperature Sensor |
Platinum Resistance.PT100Ω |
|||||
Running Model |
Constant/Fix-value Model and Programmable Model |
|||||
I/O Interface |
Communicate port (RS485) to connect test chamber to a PC |
|||||
Standard Configuration |
Test Chamber x 1, Specimen Holder Shelf x 2, φ100mm Cable Access Port x 1 with 1 soft plug, EMO x 1, Tri-color Indicator x 1, etc. |
|||||
Safety Protection |
Power leakage protection/Compressor over-heat, over-load or over-current protection/Dry burning protection. |
|||||
Voltage |
380V/440V±10%, 50Hz/60Hz or as per requirement |
|||||
Ambient Enviromental for application |
5°C～+30°C ≤ 85%R.H |
|||||
Test Standards (not limited to) |
IEC60068-2-1 |
|||||
FAQ
1. Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
2. How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our official website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site
3. Do you offer after-sales service?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance,while considering of sea transportation, we can extend 2 months for our customers.
For customers in North America, our representative office in City of industry in the United States can provide fast door-to-door technical services
http://www.climate-testing.com/
